Raspberry Pi Zero USB Dongle - How cool is this!

Put this together by following these instructions!
EQUIPMENT LIST
Raspberry Pi Zero – Amazon | Ebay

3D printed Files – http://www.thingiverse.com/thing:1836302

male usb connector – Amazon | Ebay

4 wires

some soldering skills

PROCESS
STEP 1
Firstly we need to install a USB male header to our Raspberry Pi Zero. here is the diagram you need to follow to solder the male USB to the raspberry pi zero

I would also add some electrical tape to protect the usb connector from grounding with the raspberry pi

STEP 2
I’m using the latest Raspberry Pi Image called Pixel.

Raspbian

and load the the image to the sd card.

When you are done, located the file config.txt from the Boot drive of the sdcard and insert this at the end

dtoverlay=dwc2
then save the file, and locate the file called cmdline.txt and insert this text right after rootwait

modules-load=dwc2,g_ether
when done, save the file and you can now insert the sdcard into the raspberry pi zero

to access your raspberry pi from your computer, use ssh client and point it to

raspberrypi.local

now you should be all done!