Standard Syntax for ElectriCChain IoT TXID

Following on from the construction of the First ElectriCChain node and now The SolarCoin Telegram Group building a headless SolarCoin full node for the Raspberry Pi2/3. We would like to standardise the syntax for the TXID that the IoT can tag on transactions in order to build the base of ElectriCChain.

Orginally, the TXID that can be written for a full node on ElectriCChain was set as:

text:Note this is all public information ReneSola Solar JC250M-24/Bb E-tracer ET3415 Aedilis Cloud Industries WCC200 sn >1915040004 Delta Ohm LP PYRA 10 2016-07-19-2019-07-19 0.25kW off chain sunpulse.cloudindustries.eu 35.6556177971N, >139.698872606E operation Hello World- I am the Ninja Node 1 and the first on the ElectriCChain. Hello renewable future!

However for the IoT RPi's and other IoT devices, we would like to add to this syntax in order to accommodate for the two following cases;

Case (1) The Raspberry Pi 2/3 is not solar powered or is solar powered.
Case (2) The node is static or dynamic for its GEO-ID (latitude/ longitude).

Suggested TXID standard:

text:Note this is all public information ReneSola Solar JC250M-24/Bb E-tracer ET3415 Aedilis Cloud Industries WCC200 sn 1915040004 Delta Ohm LP PYRA 10 2016-07-19-2019-07-19 0.25kW off chain sunpulse.cloudindustries.eu Hello World- I am the Ninja Node 1 and the first on the ElectriCChain. Hello renewable future!, IoT RPI3b dynamic solar powered

Documentation here.

Note to remove the latitude and longitude if the IoT is moving and dynamic. If the IoT is static in one location, keep the latitude and longitude as per syntax.

After you send this as a TXID as a transaction on the SolarCoin blockchain, you will be be able to search this instantly here.