Recycling Using Empty Nivea for Men Rollon

Hello everyone I’ll like to introduce you all of my #RECYCLINGDIY projects. I’ll be presenting more than one project using different used materials. Today I’ll only be using one waste product I recycled for a necklace pendants. I had many ideas to create a particular new material but I was confused on how and when to start. As God may have it I check my house and I saw that the last Nivea for men rollon finished before I bought the new one I’m currently using so I collected the used rollon since there is nothing left inside of it.

I then look at the whole container and was confused the part to use so I looked at it very well and then concluded that the roll itself will be of good use to develop and pendants for my necklace. This is how I recycled for a pendant.

Materials

Rollon waste

Yellow colored dot bead

Brown colored dot bead

Blue colored dot bead

Wire

Gum

Black necklace supporter

The first thing I did was to pour little gum on the top surface of the rollon waste material and I placed a brown dot bead. I allowed it for sometime so it’ll dry properly. I then touched it and it was strong before I moved for other things.

To place the yellow colored dot bead I did it in form of round shape but didn’t have to go exactly so I can get exactly the shapes I want. I pour little gum from the starting point and placed one yellow dot bead. I also allowed the yellow dots colored bead to dry. I continued to make sure all the yellow dots colored bead go round the rollon waste material so I will have to see the exact results for my necklace pendant.

The next I did was to pour a little gum on the rollon waste material from the down where the yellow dot beads were placed. I started by placing another color bead of which is blue dot bead but 3 from the left and another 3 from the right and in the center was another 1 blue dot colored bead placed.

The next I did was to pour a little gum to the top left and right close to the brown dot bead placed. I placed 1 blue colored dot bead to the right and another to the left. I also allowed the beads to dry.

The next I did was to cut a wire that will allow the black necklace supporter to pass. I also used a gum to place it inside the brown colored dot bead. I then inserted the black rope supporter for my necklace to be complete.