ATM machine series: Discussion about Voult Lock (Digital Lock 🛅).

𝐇𝖾ᥣᥣⱺ 𝐇𝗂𝗏𝖾𝗋𝗌 ❤️

Shopnilhasan here to discuss with you about ATM machine main parts. I am an Engineer and doing job as Technical support Engineer at reputed ATM machine sales and service company. I love my job very much and try to do it with the utmost attention. In fact, I can say that it is truly a joy to do something I love and do it with great pleasure, which helps me to move forward constantly. I work on a machine that is a combined machine that combines electrical, mechanical, electronics, networking, and software. This machine constantly presents me with new challenges, but I deal with them with the utmost efficiency and move forward.

Today I will again discuss with you some of the important parts of an ATM machine. In fact, ATM machines are very complex and made up of various delicate devices. You won't be able to work well here unless you have a good knowledge of this machine. I have been working on this machine for a long time and because I have a good understanding of it, I am constantly able to solve its problems. Anyway, let's go over the various subtleties of ATM today.

Digital lock or vault lock is one of the most important devices or spare parts of ATM or CRM machine. Through this device, the votes of an ATM and the money stored inside are kept safe. It is a type of lock that is very sensitive and works very delicately. Its dial pack is encrypted and it is made with very high technology.

This digital lock has two parts, a dial pad in the front and a locking device in the back. First, the dial pad is used to open and close the lock by entering a certain code or password. According to the command received from the dial pad, the circuit inside the locking device inside the lock is instructed to open or close it. When the locking device inside receives the command to close, the locking part behind it locks the lock, in the same way, when the dial pad tells the locking device inside to open, it opens the lock with its mechanism. This is a very nice and delicate work, if any of the commands are messed up, this lock will not work properly.

This digital man has a total of three parts, the dial pad and the battery on the front and the locking device with a circuit on the inside. First, we fix the locking device on the back with screws and then we attach the front dial pad with glue. A thin wire is connected between this locking device and the dial pad, through which power and necessary signals are supplied. After we attach the locking device and the dial pad, we activate this dial pad through certain codes and set the lock. This is a very delicate and complex process through which this dial pad works actively. Even after fixing everything, we open and close the board from the outside five to seven times without putting any voltage. If we think everything is fine, then we finish the work of this lock and apply voltage.

Such a lock is essential and necessary for the security of a vault. Such a digital lock is safe and strong. It is not easy to break or damage it. As a result, the money vault is quite safe and helps us to do our work properly. The bottom line is that such a digital lock is essential and very important to operate an ATM machine.

This was my plan for today. I will be back with more great content very soon. Thank you very much for taking the time to read today's post, I hope you will stay with me in the next episodes.

I am Shopnil Hasan, From Bangladesh. My hobbies are gardening and traveling to new places. I am nature lover. Love and Simplicity is my power ☘️