ATM machine series: Discussion about Ac motor and Vacuum Pump.

𝐇𝖾ᥣᥣⱺ 𝐇𝗂𝗏𝖾𝗋𝗌 ❤️

Shopnilhasan here to discuss with you about ATM machine main parts. I am an Engineer and doing job as Technical support Engineer at reputed ATM machine sales and service company. I love my job very much and try to do it with the utmost attention. In fact, I can say that it is truly a joy to do something I love and do it with great pleasure, which helps me to move forward constantly. I work on a machine that is a combined machine that combines electrical, mechanical, electronics, networking, and software. This machine constantly presents me with new challenges, but I deal with them with the utmost efficiency and move forward.

Today I will again discuss with you some of the important parts of an ATM machine. In fact, ATM machines are very complex and made up of various delicate devices. You won't be able to work well here unless you have a good knowledge of this machine. I have been working on this machine for a long time and because I have a good understanding of it, I am constantly able to solve its problems. Anyway, let's go over the various subtleties of ATM today.

Ac motor pump:

AC motor pump is one of the most important parts of this machine. Without it, the whole machine is immobile and it is the only one used to operate the whole machine. This AC motor rotates the whole machine and helps to do the necessary work. You can say that it is the main driving force of the whole machine and the whole machine is operated by this pump.

Vacuum Pump:

Here a plastic vacuum pump is used. It is connected just behind the AC motor through a thin septum. When the AC motor rotates, this vacuum pump also rotates and creates a vacuum flow. And through this vacuum flow, the money is taken out of the machine and given to the customer. You can say that this vacuum is one of the parts of this machine without which it is not possible to operate this machine.

Ac motor:

The AC motor that is connected here is operated with 220 volt AC. It is quite powerful and it is capable of running the entire machine. When this AC motor is operated with 220 volts, the power is transferred to the entire machine through the belt and various gears connected to it and through the rotation process, the money is reached from the entire machine to the customer's hands. You can call this AC motor the main lifeblood of this machine.

Vacuum Pump:

The pump used here is mainly made of plastic and rubber. Its upper part is made entirely of plastic and inside a connector is connected to a device like a valve and it is connected to the long septum at the back of the AC motor. When the AC motor runs, the connector in the middle of this pump rotates and a vacuum flow is created here. And this vacuum flow is circulated throughout the machine through the pipe and the money is taken out of the box and reached the customer's hands with the help of various belts and gears. If for some reason the vacuum flow of this pump decreases or the vacuum pump is damaged, then it is not possible to withdraw money from this machine.

This was my plan for today. I will be back with more great content very soon. Thank you very much for taking the time to read today's post, I hope you will stay with me in the next episodes.

I am Shopnil Hasan, From Bangladesh. My hobbies are gardening and traveling to new places. I am nature lover. Love and Simplicity is my power ☘️