BuckyDurddle avatar

VCV Rack - Bogaudio's XCO Module

buckydurddle

Published: 21 Jun 2018 › Updated: 21 Jun 2018VCV Rack -  Bogaudio's XCO Module

VCV Rack - Bogaudio's XCO Module

Repository

https://github.com/bogaudio/BogaudioModules

Learn how to use Bogaudio's VOC and XCO modules for VCV Rack.

What Will I Learn?

  • You will learn about VCOs
  • You will learn how to choose waveforms
  • You will learn how to switch VCO and XCO to LFO-mode
  • You will learn how to control the module with voltage
  • You will learn the purpose of Hard Sync
  • You will learn how to independently manipulate each waveform
https://ipfs.busy.org/ipfs/QmV3RA8CLddRCLqvY2niVZS6MKF4A9WiMUrUSny5ngvAu4

Timeline

0:00 Intro
0:49 Setup
4:49 Github Repo
5:19 VCO Explained
7:00 Initialize
7:34 Waveforms
9:29 Interface
9:43 Frequency Selector
10:37 Slow - LFO
13:08 Frequency Modulation
15:16 External Pitch Control
16:18 Sync
19:26 Independent Outputs
20:15 Mixer
22:51 FXs

Lesson Files and Resources

Requirements

To complete this tutorial learners will need to have the following:

  • VCV Rack installed on a Mac, Windows or Linux computer
  • Bogaudio's module pack installed

Difficulty

This tutorial is at an beginner level.

Description

This tutorial explores how to use both the VCO and XCO modules by Bogaudio.

Learn about VCOs

A VCO is a Voltage Controlled Oscillator. An oscillator creates cycles in a medium. The medium we use in Modular Synthesis is voltage. In the case of the two oscillators we are examining here, the oscillating voltage is interpreted as sound.

https://ipfs.busy.org/ipfs/QmVWLfMbXYNTURxzrraKgQcQkA55BxySGY4an8Wi132QmG

Learn how to choose waveforms

Both the VCO and XCO provide pure waveforms in types: sine, triangle, saw and square. We can further manipulate and combine these waveforms to create unique sounds using the modules.

Learn how to switch VCO and XCO to LFO-mode

Both oscillators here can function as either a VCO or as an LFO. As a VCO both will produce audible sound. As an LFO the output is control voltage and is intended to control other modules.

https://ipfs.busy.org/ipfs/QmbKZaDAzA28e3M5MjQQ1ygBSsFZ5qWZaonnzD6SpyGCHi

Learn how to control the module with voltage

There are several inputs on both the VCO and XCO modules. In the video we examine how these inputs can use control voltage to manipulate the module.

Learn the purpose of Hard Sync

After an oscillator has operated for a period of time the waveform can drift. This means that the cycle produced by the module is no longer exactly in sync with other modules. This drift can be a millisecond, but can cause the audio signal to distort. Sync resets the waveform to its original position at the zero start point.

https://ipfs.busy.org/ipfs/QmRN8qCRpgfoNdmFkebD2c38BMeytRSiJWM7UnL67xsdft

Learn how to independently manipulate each waveform

XCO provides us with controls to manipulate each of the four waveforms. Each has its own unique effect which are explored in the video tutorial.

Each waveform also has a Phase control, which allows us to change the phase of each wave with respect to the other three.
phase.jpeg

I hope you enjoy this tutorial. If you have any specific questions for me feel free to leave it in the comments of this post and I will do my best to get back to you with an answer.

Cheers,

buckydurddle@buckydurddle

Video Tutorial

Curriculum



Learn VCV Rack Modular Synthesis Series

Rack Logo.jpg

If you would like to learn how to use the open source modular synthesis DAW VCV Rack then have a look at these tutorials:

Click here for @buckydurddle's guide to VCV Rack


Learn MuseScore2 Series


Learn Hydrogen Drum Machine Series

zeropoint_logo.png

If you would like to learn how to use the open source drum machine Hydrogen then have a look at these tutorials:

Click here for @buckydurddle's guide to Hydrogen


Learn Helm Series

helm_logo6 small.png

If you would like to learn how to use the open source sound software synth Helm then have a look at these tutorials:

Click here for @buckydurddle's guide to Helm


Learn Audacity Series

audacity logo small.png
If you would like to learn how to use the open source sound recording and editing software Audacity then have a look at these tutorials:

Click for @buckydurddle's Guide to Audacity


Logo - http://tytel.org/helm

Logo - https://www.audacityteam.org/

Logo - http://www.hydrogen-music.org/hcms/

Logo - https://www.vcvrack.com

Logo - https://www.blender.org

Leave VCV Rack - Bogaudio's XCO Module to:

Written by

Musician, Music Teacher, Video Producer

Read more #utopian-io posts


Best Posts From BuckyDurddle

We have not curated any of buckydurddle's posts yet. But you can encourage our curation team to review posts by visiting them regularly and by referring other readers. Because we give priority to frequently read content.

More Posts From BuckyDurddle